Home ] Up ] Contact Us ] Contents ] Links ]   
 
   
  Drum Plotters
Home
About Us
Products

 

Send E-Mail to NovaMax Sales    Send E-Mail to NovaMax Info




  PLOTTER STYLES
   SUMMA

 
   D60 SE MODEL
     SHOWN WITH STAND

 
   T75 SL PLOTTER
     T-SERIES MODEL

 
   D120 SL PLOTTER
     D-SERIES MODEL

   

  PLOTTER STYLES
   MIMAKI

  
  CG-60ST PLOTTER
   DESKTOP MODEL

   WIDTH 586mm/23"




 
  CG-75FX PLOTTER
   MODEL WITH STAND

   WIDTH 760mm/29.9"



 
 CG-130FX PLOTTER
  MODEL WITH STAND

  WIDTH 1300mm/51.2"

 

 





    

 

 

   

 

 
 
 


QUALITY DRUM PLOTTERS/CUTTERS

  
bullet

SUMMA / SUMMAGRAPHICS -
DRUM PLOTTERS FOR SIGNMAKING

bullet

MIMAKI -
DRUM PLOTTERS FOR SIGNMAKING

    



SUMMA PLOTTERS
SIZES & TECHNICAL SPECIFICATIONS

  SUMMA MODEL

SIGN PRO SL  "T-SERIES"

  Speed / Acceleration
  & Pressure Values

Axial to 1000 mm/sec. (40 in./sec.) Diag. to 1414 mm/sec. (56 in./sec)
Accel to 4 g axial; Up to 5.5 g diag.
Pressure : 0-600 grams, in 5-gram increments

  T-75SL

Width 75 cm (30 in.)
Tangential-knife, Friction feed

  T-120SL

Width 120 cm (48 in.)
Tangential-knife, Friction feed

  T-1600SL

Width 160 cm (64 in.)
Tangential-knife, Friction feed

  SUMMA MODEL

SIGN PRO SL  "D-SERIES"

  Speed / Acceleration
  & Pressure Values
Axial to 1000 mm/sec. (40 in./sec.) Diag. to 1414 mm/sec. (56 in./sec)
Accel to 4 g axial; Up to 5.5 g diag.
Pressure : 0-400 grams, in 5-gram increments
  D-75SL

Width 75 cm (30 in.)
Drag-knife, Friction feed

  D-120SL

Width 120 cm (48 in.)
Drag-knife, Friction feed

  D-160SL

Width 160 cm (64 in.)
Drag-knife, Friction feed

  SUMMA MODEL

SUMMACUT-SERIES

  Speed / Acceleration
  & Pressure Values
Diag. to 44 inches per second
(1131 mm/sec) diagonal
Accel to 3 g diagonal
Pressure : 0-400 grams, in 5-gram increments
  D-60 Desktop

Width 24" / Drag Knife

  D-60SE

Width 24" / Drag Knife

  D-120SE

Width 48" / Drag Knife

SUMMA / ACCURACY / SYSTEM RESOLUTION

0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English)


SUMMA / REPEATABILITY

Within +/- 0.1 mm (0.004 in.) on plots:

up to 12 m (40 ft.) long on rolls up to 760 mm (30 in.) wide
up to 4 m (13 ft.) long on rolls over 760 mm (30 in.) wide

SUMMA / TOOL COMPATIBILITY

Standard T- or D-Series knife for vinyl, reflective and fluorescent films

Thick material T-Series knife for sandblast resist and other thick films

Pen for plotting on paper

Pounce tool (optional) for pouncing on paper

NOTE : DESCRIPTIONS & TECHNICAL DATA ARE NOT BINDING AND MAY BE CHANGED AT ANYTIME, WITHOUT PRIOR NOTICE

SUMMA-CUT / PLOTTER SERIES

The SummaCut™ plotter are ideal for sign makers who require a high-performance cutter with the speed, precision and durability needed to create vinyl signs, banners and vehicle lettering in volume production environments. Packed with unique state-of-the-art features, SummaCut plotters are ideal for companies that don't need tangential cutting or the OPOS contour cutting alignment features that are available with our SummaSign® Pro cutters. But by every other measure, SummaCut is a true Pro level machine with technical advantages that no other cutters in the world can offer, at any price.

Guaranteed Repeatability: SummaCut plotters have the same patented drive drum system found in our Pro cutters, so you can cut individual plot files up to 26 feet long with guaranteed pin-point accuracy. Or send multiple files, and cut an entire roll without fear of skewing off the pinch rollers.

Easy Media Loading: Integrated media rollers and our unique roll-end flanges make straight media loading fast and easy. Combined with our super-accurate tracking, you'll never babysit another plot, even at top speed.

Volume Throughput: At up to 44 inches per second, the super-affordable SummaCut cranks out vinyl faster than most manufacturers' best machines.

 

SUMMA SIGN PRO / PLOTTER SERIES

To be a Pro, it takes more than simply including it in our product name. It takes real innovation and the out-and-out drive to be the best. That overriding Summa philosophy has put our SummaSign® Pro cutters in a class of their own.

Performance: SummaSign Pro handles advanced sign applications with unparalleled speed, precision and versatility, even under years of intense, daily use. Powerful dual servomotors cut up to 56 inches per second while maintaining pinpoint accuracy to a minimum of 40 feet in length. Summa's patented drive drum system tracks better than any other media feed system - including tractor-feed and active-steering systems that cannot fully correct for poor tracking performance.

Technical Innovation: SummaSign Pro is the only drum-feed cutter in the world with optional tangential cutting. Often found in expensive flatbed cutters, tangential cutting uses a motorized head that lifts and turns the blade for perfect angled cuts, which drag-knife cutters can't match. If you're looking for precise tangential cutting, SummaSign Pro is the only cutter you'll want to consider.

Contour Cutting: The optional OPOS optical positioning system automatically aligns printed images and labels for exacting contour cuts. OPOS scans registration marks on printed vinyl to determine exact positioning, then SummaSign Pro's advanced firmware programming adjusts the plot file to compensate for image rotation and scaling. It's automatic, far more accurate than manual alignment systems, and exclusively available with SummaSign Pro.

  


MANY OTHER MODELS, SIZES, TOOLS AND CONFIGURATIONS ARE AVAILABLE.

PLEASE CONTACT US FOR ADDITIONAL INFORMATION ON THIS PRODUCT LINE OR TO REQUEST TECHNICAL ASSISTANCE WITH YOUR APPLICATION

For your convenience, please use the INFORMATION REQUEST FORM below to submit your product inquiry via E-mail.


INFORMATION REQUEST FORM


Send Product Literature
Have Salesperson Contact Me

Name
Title
Company
Address
City
State
Zip Code
Country
Phone
Email

Question / Request

   



TOP OF PAGE

Home ] Up ] Contact Us ] Contents ] Links ]

 
Up



SUMMA D60
Desktop Model


Product Selection:


NovaMax Intl will be happy to assist you with our product knowledge and expertise.  We have a whole team of application engineers that can give you guidance and make recommendations regarding your cutting project.

PLEASE TELL US WHAT YOUR CUTTING OR APPLICATION REQUIREMENTS ARE, AND WE WILL BE HAPPY TO ASSIST YOU AND PROVIDE YOU WITH A PROPOSAL

All drum cutter units sold through NovaMax Intl. can usually be installed on-site by the end-user.  Detailed instructions are included with each unit.



Technology:

NovaMax Intl  is proud to be able to offer a selection of only the best and the most technologically advanced products to out clients. Our extensive technological background enables us to locate and offer you some quality products that represent the best price performance ratio on the market.

Please inquire with us, if you are a manufacturing company that would like to offer your products through our company. 


SUMMA - "T-SERIES" Tool head, with tangential knife control


TOOL HEADS : 
While some of the more economical drum cutter brands only offer drag-knife technology, SUMMA offers both drag-knife as well as tangential-control knife technology on its quality units. 




    

 

Download of Product Brochures ( PDF Format ):

NOTE : ADOBE Acrobat/ Reader is required in order to download the brochures listed below


Download ADOBE Acrobat/Reader 



 
  BROCHURES FOR
  DOWN-LOADING:

Click on the PDF Icons below to open the brochures

SUMMA Cut Brochure - English
SUMMA Brochure
Summa-CUT
D-Series Cutters 
SUMMA Sign-Pro T Brochure - English
SUMMA Brochure
Sign-Pro SL
T-Series Cutters
SUMMA Sign-Pro D Brochure - English
SUMMA Brochure
Sign-Pro SL
D-Series Cutters



Click on the Icon below to download ADOBE Acrobat/ Reader, which are required in order to be able to read the above listed brochures,

Download ADOBE Acrobat/Reader

 

OPOS 2.0 / OPTICAL POSITIONING SYSTEM

OPTIONAL ITEM / FOR SUMMA PLOTTERS

OPOS 2.0
is an enhanced edition of our revolutionary OPOS technology (Optical POSitioning), the world’s most accurate and popular contour-cutting alignment system. It combines an on-board infrared sensor and internal SummaSign Pro SL programming that dynamically rescales plot data to deliver the unmatched contour-cutting accuracy that has made SummaSign with OPOS the choice of graphics professionals the world over.








 

 
   
Copyright © 1995-2010 NovaMax International LLC. All rights reserved